MACHINE SPECIFICATIONS
SUB-SPINDLE ( OPTIONAL )*3 |
GS-4000 / L / L² / L³ |
GS-4300 / L / L² / L³ |
Chuck size |
8" |
Hole through spindle |
Ø 55 mm |
Spindle bearing diameter |
Front : Ø 100 mm / Rear : 70 mm |
Spindle nose |
A2-6 |
Spindle motor type |
18 / 21 kW ( 24 / 28 HP ) ( BiI112L / 15,000 ) |
Motor output ( Cont. / 15 min. ) |
15 / 18.5 kW ( 20 / 24.8 HP ) |
Motor full output speed |
5,000 rpm |
Spindle drive system |
Direct built-in motor ( Integrated Motor ) |
Spindle drive ratio |
1 : 1 |
Spindle speed range |
4,800 rpm |
Spindle torque ( Cont. / 15 min. ) |
95 / 118 N-m |
Zs-axis travel |
800 / 1,550 / — / — mm |
Zs-axis rapid |
24 / 24 / — / — m/min. |
Slide way type |
Hardened & Ground Box Ways |
Zs-axis servo motor |
3.0 kW ( 4 HP ) |
Home
Horizontal Turning
GS-4000 Series
Detail Info
Specifications
Dealer Network
Contact / Inquiry