GOODWAY CNC Machining company logo

GMS series model shown
GTZ-1500 Series Print This Page
SPINDLE 1 GTZ-1500
Hole through draw tube Ø 46 mm Ø 52 mm Ø 66 mm
Draw tube OD. Ø 55 mm Ø 62 mm Ø 76 mm
Hole through spindle Ø 56 mm Ø 63 mm Ø 78 mm
Front spindle bearing diameter Ø 80 mm Ø 90 mm Ø 110 mm
Rear spindle bearing diameter Ø 70 mm Ø 80 mm Ø 100 mm
Hydraulic cylinder 6"
Spindle nose A2-5 A2-5 A2-6
Motor output ( Cont. ) 7.5 kW 7.5 kW ( Opt. 11 kW )
Motor output ( 15 min. ) 11 kW 11 kW ( Opt. 15 kW )
Motor full output speed 1,500 rpm
Spindle drive system Direct belt drive
Spindle drive ratio 1.08 1.11 1.21
Spindle speed range 6,000 rpm 5,000 rpm 4,500 rpm
Spindle full output speed 1,852 rpm 1,802 rpm ( Opt. 1,351 rpm ) 1,653 rpm ( Opt. 1,240 rpm )
Spindle torque ( Cont. ) 39 Nm 40 Nm ( Opt. 78 Nm ) 43 Nm ( Opt. 85 Nm )
Spindle torque ( 15 min. ) 76 Nm 78 Nm ( Opt. 130 Nm ) 85 Nm ( Opt. 143 Nm )
SPINDLE 2
Hole through draw tube Ø 46 mm Ø 52 mm Ø 66 mm
Draw tube OD. Ø 55 mm Ø 62 mm Ø 76 mm
Hole through spindle Ø 56 mm Ø 63 mm Ø 78 mm
Front spindle bearing diameter Ø 80 mm Ø 90 mm Ø 110 mm
Rear spindle bearing diameter Ø 70 mm Ø 80 mm Ø 100 mm
Hydraulic cylinder 6"
Spindle nose A2-5 A2-5 A2-6
Motor output ( Cont. ) 7.5 kW 7.5 kW ( Opt. 11 kW )
Motor output ( 15 min. ) 11 kW 11 kW ( Opt. 15 kW )
Motor full output speed 1,500 rpm
Spindle drive system Direct belt drive
Spindle drive ratio 1.08 1.11 1.21
Spindle speed range 6,000 rpm 5,000 rpm 4,500 rpm
Spindle full output speed 1,852 rpm 1,802 rpm ( Opt. 1,818 rpm ) 1,653 rpm ( Opt. 1,240 rpm )
Spindle torque ( Cont. ) 39 Nm 40 Nm ( Opt. 58 Nm ) 43 Nm ( Opt. 64 Nm )
Spindle torque ( 15 min. ) 76 Nm 78 Nm ( Opt. 105 Nm ) 85 Nm ( Opt. 116 Nm )

Specifications are subject to change without notice.

Home MULTI-AXIS TURNING GTZ-1500 Series Detail Info Specifications Dealer Network Contact / Inquiry