| GTS series | Print This Page |
|---|
| 1st & 2nd TURRET | GTS-150 | GTS-200 | GTS-260 | |
|---|---|---|---|---|
| Stations | 12 | |||
| Indexing drive | FANUC AC Servo motor | |||
| Indexing speed | 0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | |||
| Accuracy | Positioning : ± 0.00069°, Repeatability : ± 0.00027° | |||
| O.D. tool shank size | □ 20 mm | □ 25 mm | ||
| I.D. tool shank size | Ø 25 mm | Ø 32 mm | ||
| LIVE TOOLING TURRET ( OPT. ) |
GTS-150 | GTS-200 | GTS-260 | |
| Max. turning length | 180 mm | 200 mm | ||
| Stations | 12 | |||
| Live tooling stations | T12 | 12 ( Live tooling tools rotate in working position only ) | ||
| T6 | 6 ( Live tooling tools rotate at the same time ) | |||
| Live tooling drive motor | T12 | 1.1 / 3.7 kW ( cont. / 30 min. ) | 2.7 kW | |
| T6 | 2.2 / 3.7 kW | |||
| Live tooling torque | T12 | 7 / 23.6 N-m ( cont. ) | 12 N-m | |
| T6 | 14 / 23.6 N-m | |||
| Index speed | 0.3 sec. Adjacent / 0.5 sec. 180 degrees ( Single step ) | |||
| O.D. tool shank size | □ 20 mm | □ 25 mm | ||
| I.D. tool shank size | Ø 25 mm | Ø 32 mm | ||
| Live tooling shank size | T12 | ER25 ( Ø 16 mm ) | ER32 ( Ø 20 mm ) | |
| T6 | ER25 ( Ø 16 mm ) | |||
| Live tooling RPM range | 4,000 rpm | |||
Specifications are subject to change without notice.
Top