GOODWAY GMS-2000 Series

GMS Series	Print This Page

SPINDLE	GMS-2600ST	GTS-2800ST
Bar capacity	Ø 51 mm	Ø 65 mm
Hole through spindle	Ø 61 mm	Ø 76 mm
Spindle bearing diameter ( Front / Rear )	Ø 100 / 80 mm	Ø 120 / 100 mm
Chuck size	Ø 8"	Ø 10"
Spindle nose	A2-6
Spindle motor type	Bi I170S / 6,000
Spindle motor output ( Cont. / 30 min. )	11 / 25 kW ( Opt. 22 / 25 kW )
Gear ratio	1 : 1
Spindle speed range	4,800 rpm	4,000 rpm
Spindle motor torque ( Cont. / 30 min. )	131 / 149 N-m ( Opt. 157 / 223 N-m )

Specifications are subject to change without notice.