| GTH Series | Print This Page |
|---|
| TURRET | GTH-2000 |
|---|---|
| Station | 12 |
| Indexing drive | FANUC AC Servo motor |
| Indexing speed | 0.2 sec. ( Adjacnt ) / 0.5 sec. ( 180˚ Single step ) |
| O.D. tool shank size | □ 25 mm |
| I.D. tool shank size | Ø 40 mm |
| LIVE TOOLING TURRET ( OPT. ) |
GTH-2000 |
| Max. turning diameter | Ø 300 mm |
| Live tooling stations | 12 ( Opt. 16 ) |
| Live tooling motor output ( cont. / 30 min. ) |
AC 3.7 / 5.5 kW |
| Indexing drive | FANUC AC Servo motor |
| Indexing speed | 0.2 sec. ( Adjacnt ) / 0.5 sec. ( 180˚ Single step ) |
| O.D. tool shank size | □ 25 mm ( □ 20 mm ) |
| I.D. tool shank size | Ø 40 mm ( Ø 32 mm ) |
| Live tooling shank size | ER 32 ( Ø 20 mm ) [ ER 25 ( Ø 16 mm ) ] |
| Live tooling RPM range | 6,000 rpm |
Specifications are subject to change without notice.
Top