| SPINDLE |
TS-100 |
TS-150 |
| Chuck size |
6” or 42 collet chuck |
| Spindle nose |
A2-5 |
| Hole through spindle |
Ø 41 mm |
Ø 56 mm |
| Bar capacity |
Ø 32 mm |
Ø 45 mm |
| Front / Rear spindle bearing diameter |
Ø 70 / 60 mm |
Ø 80 mm / 70 mm |
| Spindle speed range |
60 ~ 6,000 rpm |
| Motor output ( Cont. / 15 min. ) |
5.5 / 7.5 kW |
| Spindle drive system |
Direct Belt Drive |
| Cs-AXIS ( OPTIONAL ) |
| Cs-axis drive motor |
BZ-sensor Ø 125 ( Opt. HEIDENHAIN ERM280-120 ) |
| Min. spindle indexing angle |
± 0.001° |
| Dynamic accuracy |
± 0.002° |
Home
Horizontal Turning
TS-100 Series
Detail Info
Specifications
Dealer Network
Contact / Inquiry
Top