MACHINE SPECIFICATIONS
| GS-6000L Series |
|---|
| TAILSTOCK | GS-6000L / L² / L³ | GS-6600L / L² / L³ | GS-6800L / L² / L³ |
|---|---|---|---|
| Quill center taper | MT#4 ( Dead center ) [ Opt. MT#5 ( Live center ), MT#5 ( Dead center ), MT#6 ( Live center ) ] |
||
| Quill diameter / travel | Ø 110 mm / 150 mm ( Opt. Ø 160 / 150 mm*2 ; Ø 120 / 150 mm*3 ) | ||
| Tailstock base travel | 790 / 1,790 / 3,200 mm | ||
| Programmable quill / base | Yes / Yes | ||
| Programmable base type | Position by Z-axis | ||
| GENERAL | GS-6000L / L² / L³ | GS-6600L / L² / L³ | GS-6800L / L² / L³ |
| Positioning accuracy ( X / Z ) | 0.015 mm*4 | ||
| Repeatability ( X / Z ) | ± 0.003 mm*4 | ||
| CNC control | FANUC Oi Plus - TF ( Opt. 31i ) | ||
| Voltage / Power requirement | AC 200 / 220 +10% to -15% 3 phase / 55 kVA | ||
| Air Pressure | 6 kgf / cm² ( 85.2 PSI ) | ||
| Hydraulic / Coolant tank capacity | 15 L | ||
| Coolant tank capacity | 240 / 320 / 680 L ( 63 / 84 / 179 gal ) | ||
| Coolant pump | 1 kW ( 1.5 HP , 60 Hz ) rated at 5 bar ( 72 PSI ) | ||
| Machine weight | 12,000 / 16,000 / 18,000 Kg ( 27,000 / 36,000 / 40,000 lb ) | ||
| Dimensions L × W × H | 3,696 x 2,422 x 2,570 mm 5,060 x 2,422 x 2,570 mm 6,764 x 2,910 x 2,510 mm |
||
Top
Specifications are subject to change without notice.
*1 The specification of each model may be slightly different, please refer to the interference diagram.
*2 Option dead center MT#5.
*3 Option live center MT#6.
*4
Measurement is based on JIS B 6331.